Every homebuyer wants the security of knowing that the home he/she is considering is good beneath the surface. For all home sellers, here’s a list of housing systems that should be in order if you want to pass the inspection with flying colors.

Problem plumbing

Defective plumbing usually manifests with leaking and clogging. Looking under sinks and pipes is generally a great place to start looking for leaks. Water pressure can be determined by turning on all the faucets in the highest bathroom and then flushing the toilet. The sound of running water indicates undersized pipes. If dirty water appears when you turn on the faucet, it could indicate that the pipes are rusting. 

Damp or wet basement

A white mineral deposit on the walls and basement floor indicates water seepage. A mildew odor might also be present. Sealing a crack in or around your basement foundation, depending on severity and location, runs from $300 – $1,000. To waterproof an average 3 bedrooms home, is estimated at around $5,000 – $15,000. 

Insufficient wiring & electrical

Your home should have a minimum of 100 amps service. It should be clearly marked and the wire should be copper. Octopus plugs indicate inadequate circuits and are a fire hazard. Cover plates on all junction boxes and outlets.

Faulty heating & cooling systems

The most common causes of poor heating are insufficient insulation, leading to heat loss and an inadequate or a poorly functioning heating system. A clean furnace, without rust on the heat exchanger, typically has a life span of 15-25 years. A cracked heat exchanger on a forced air gas system could emit deadly carbon monoxide into the home. This item is not repairable and must be replaced if damaged. 

Roofing defects 

Water seepage through the roof results from deterioration of the asphalt shingles (e.g. curling or splitting), or damage from a storm. When water is not properly directed through gutters and downspouts, or gutters leak, this could result in major internal problems. 

Damp attic spaces

Aside from basement dampness, problems with ventilation, insulation and vapor barriers can cause water, moisture, mold and mildew to form in the attic. This can lead to premature wear of the roof, structure and building materials. The cost to fix this damage could easily run over $2,500.

Rotting wood

Rotting occurs from exposure to elements, and is most prevalent on doors, window frames, trim, siding, decks and fences. 

Masonry work

Left unattended, smaller repairs can lead to problems with water and moisture penetration into the home which could lead to a chimney being clogged by fallen bricks or even a chimney which falls onto the roof.

Adequate security features 

These basic safety features should be functioning properly: locks on windows and patio doors, dead bolts on the doors, smoke and carbon monoxide detectors on every level. 

Structural/foundation defects

Investigate the underlying footing, basement and foundation to ensure structural integrity. 

Keeping these items in mind as you walk through your home, will help you provide for any future costs and disappointments. A Real Estate Professional has many resources in place to assist you. They can recommend a professional inspector, repair services or any other housing related need you may have.